Feature:
* Once reach setting value of the torsion, scale wrench will automatically disconnect clutch and happen idling, so not happen too much tighten
* By the lock structure,will lock the setted torque, therefore, it can prevent deviation in the operation.(for 6~50 LTDK)
* 1.5~~3 LTDK type with a tube clip of clamp screw head .
* After seting required torque value,whoever can use the same torque force to work.
* Each of type with a tool bit.
* With casing head and hex head of each type
* Can be used in left or right
Specification:
| Type |
Load range(kgf.cm) |
Min scale |
Screwdirver length(mm) |
| 1.5LTDK |
0.1-0.5 |
0.01 |
96 |
| 3LTDK |
0.2-3 |
0.02 |
96 |
| 6LTDK |
0.5-6 |
0.05 |
110 |
| 12LTDK |
1-12 |
0.1 |
160 |
| 20LTDK |
2-20 |
0.1 |
160 |
| 30LTDK |
2-30 |
0.1 |
160 |
| 50LTDK |
5-50 |
0.25 |
200 |
| 100LTDK |
10-100 |
0.5 |
235 |
){kind=link}
){kind=link}